All Access Builders LLC installs and replaces vinyl siding for homeowners across Buffalo and Erie County. We handle full siding replacement, new installations, and insulated upgrades with in-house crews trained for Western New York’s freeze-thaw cycles and lake-effect wind.
Get a Free Vinyl Siding Estimate
We install new vinyl siding on additions, renovations, and appropriate new construction projects. Our crews fasten panels correctly over properly prepared exterior wall sheathing, using starter strips, J-channel, and house wrap as part of a complete system. Not every project needs full sheathing replacement — we assess that case by case.
Replacing old siding means removing what's there, whether it's aging aluminum siding, weathered wood, or worn vinyl, and checking the wall underneath. Old siding can hide moisture intrusion or damaged sheathing you can't see from the outside. We handle removal, necessary repairs, new installation, and debris disposal, and the removal scope factors directly into your estimate.
Insulated vinyl siding adds EPS foam backing behind each panel, which can reduce thermal bridging through the wall studs. The actual energy performance depends on your home's existing wall assembly, so we don't promise a specific utility-bill reduction. We'll walk you through whether this upgrade fits your goals.
A finished exterior needs matching trim, not just panels. We install outside corner posts, window trim, and PVC accents alongside soffit ventilation and fascia work, plus gutter transitions where needed. Matching these components keeps your entire exterior looking cohesive, not patched together.
Buffalo’s position near Lake Erie means siding takes a beating from snow, wind, and temperature swings every year. We factor these conditions into product selection and installation method. Vinyl siding sheds a lot of weather, but it isn’t a standalone waterproofing or insulation system on its own.
Lake-effect snowfall and wind-driven precipitation put real stress on exterior cladding. We install products with locking seams and appropriate wind-load ratings, fastened correctly so panels stay engaged during high wind. Manufacturer wind-load ratings reflect tested conditions, not a guarantee for every specific site.
Vinyl siding isn't a fully waterproof wall barrier by itself. The real protection comes from the water-resistive barrier underneath, properly lapped flashing tape around window openings, and a functioning drainage plane that lets any moisture that gets behind the panels escape.
Vinyl panels expand and contract with temperature changes, so we fasten them with the clearance manufacturers specify rather than nailing them tight against the wall. Panels installed too tightly can buckle or distort once winter temperatures hit. We follow product-specific installation instructions on every job.
Siding that's built for Buffalo winters.
Choosing vinyl siding means choosing a profile, a texture, and a manufacturer. We walk Buffalo homeowners through actual available options, including photos and physical swatches, so you can see how a color or profile looks before we order materials.
Horizontal lap siding gives homes a classic clapboard look, while Dutch lap siding creates a sharper shadow line with its angled profile. Common widths include double 4-inch and double 5-inch panels, though not every size is available in every product line we carry.
Vertical board-and-batten, vinyl shake, and scalloped siding work well as accent features on gables and dormers. These accents pair with standard horizontal siding to add visual interest without redesigning the entire exterior. Available colors and textures vary by product line.
We install vinyl siding from CertainTeed and Mastic by Ply Gem, two manufacturers known for color retention and panel durability. Each offers different surface textures, panel thicknesses, and color selections, and both carry lifetime limited warranties on their products. We'll confirm which specific product lines fit your project before you commit.
Standard vinyl siding has a hollow-back profile and a lower upfront cost. Insulated vinyl siding adds EPS foam, raising the installed cost but offering added thermal resistance.
| Feature | Standard Vinyl Siding | Insulated Vinyl Siding |
|---|---|---|
| Initial Cost | Lower | Higher |
| Thermal Resistance | Minimal added value | Can add R-2 to R-4 |
| Panel Appearance | Hollow-back profile | Fuller, more rigid look |
| Best For | Budget-focused projects | Homes prioritizing added wall performance |
Wall area (not interior square footage), home height, architectural complexity, and whether we're tearing off existing siding all affect your price. Homes with multiple gables, dormers, or bump-outs cost more to side than a simple rectangular structure. Hidden sheathing repairs can also add to the final scope.
Our written estimates cover labor, materials, house wrap, flashing, trim, cleanup, and disposal. We separate optional upgrades, like insulated panels or accent trim, from the base scope so you know exactly what you're paying for. Any additional work found after removal gets priced separately before we proceed.
We assess your property, discuss product options, and provide a written proposal with no obligation. Submit your ZIP code and project details through our form, or call us directly to schedule a visit.
Get a written, no-obligation proposal.
Widespread cracking, buckled panels, deteriorated fasteners, and moisture damage behind the siding usually point toward full replacement. Missing panels across multiple sections or repeated repair calls on the same wall are also signs the system has reached the end of its life. Cosmetic fading alone doesn't necessarily mean replacement is required.
Isolated panel damage, like a single cracked piece from storm debris, can sometimes be repaired with a matching replacement panel if the existing product is still available. We'll assess your current siding before recommending the smaller fix over a full project.
An inspection gives you the facts before you decide. We assess the condition, explain what we find, and let you weigh repair against replacement with real information instead of guesswork.
Not sure if your siding can be repaired?
Buffalo native Matt Kulhanek founded All Access Builders LLC in 2003. Over 22 years of hands-on construction experience in Western New York shapes how our team approaches every siding project, from a single-family home to a multi-unit exterior upgrade.
Our siding installers work for us directly, not through a subcontractor. That means consistent quality control, a single project manager overseeing your job, and direct communication with our team from your first estimate through the final walkthrough.
We carry general liability insurance and workers' compensation coverage, and we're licensed to perform siding and general contracting work in Buffalo. Every project includes a written estimate, plus documented manufacturer and workmanship warranties you can reference anytime.
We walk you through material selection, scope of work, and project timeline before we start. If we find unexpected sheathing damage once old siding comes off, we explain the issue, the fix, and the cost before any change order moves forward.
Every siding project follows the same structured process, from the first site visit through final cleanup. Here’s what to expect when you work with us.
Step 1
We measure your home's exterior, assess the condition of your current siding and substrate, and check for moisture concerns. During this visit, we also walk through siding colors and profile options so you can start narrowing down choices.
Step 2
You'll receive an itemized proposal covering manufacturer, project scope, and estimated timeline. We discuss scheduling around your availability and address any local permitting requirements that apply to your specific project before work begins.
Step 3
We protect your landscaping, remove old siding where needed, and inspect the wall underneath. From there, we install the water-resistive barrier, flashing, starter strips, J-channel, and corner posts, then fasten panels with proper expansion clearance per manufacturer specifications.
Step 4
We walk the completed exterior to check panel alignment and trim, remove all installation debris from your property, and review your manufacturer and workmanship warranty documentation so you know exactly how to report any future concern.
Permit requirements vary based on project scope, address, and whether your home falls under historic preservation guidelines. We confirm the applicable requirement for your specific property and handle the permit application rather than assuming every siding project is exempt.
ASTM D3679 covers material requirements for conventional rigid PVC siding, while ASTM D7793 applies to insulated vinyl siding. These standards set manufacturing benchmarks; correct field installation, including fastening and moisture management, determines how the product actually performs on your home.
ZIP codes overlap neighborhood boundaries, so check with us to confirm coverage at your address.
Find us at 2017 Clinton Street, Buffalo, NY 14206. Call us at (716) 770-6560 to discuss your project or schedule a free estimate at your home.
All Access Builders
